HYCON\u00ae Agar Strips DG-18 are ready-to-use culture media for assessment of airborne, xerophilic molds with HYCON\u00ae Microbial Air Samplers, i.e. RCS\u00ae High Flow Touch, RCS\u00ae High Flow, RCS\u00ae Plus, RCS\u00ae Plus Ex and RCS\u00ae Standard.
\nEach agar strip is individually sealed in the transparent, primary package. The agar is filled in a flexible backing film. The formulation of the medium is a Dichloran Glycerol Chloramphenicol Agar (DG-18) according to FDA BAM M184 and ISO 21527-2.<\/p>\n
Mode of Action<\/strong> Typical Composition<\/strong> The appearance of the medium is yellowish brown and slightly opalescent. The pH value is in the range of 5.4 to 5.8. The medium can be adjusted and\/or supplemented according to the performance criteria required.<\/p>\n Application and Interpretation<\/strong> Open the wrapper approximately at 1\/3 by pealing back the plastic seal at the rounded side of the wrapper. Remove the agar strip with the coated side facing downwards. Insert the agar strip into the opening of the rotor, or the impeller drum according to the directions outlined in the user manual of the respective microbial air sampler. Place the instrument into required position, choose the appropriate sample volume and start the air sampling procedure.<\/p>\n When sampling is finished, remove the agar strip and place it back into the original wrapper. Ifnecessary, leave the plates to stand in diffuse daylight for 1-2 days. If the presence of Xeromyces bisporus is suspected, incubate the plates for 10 days. Important Notes<\/strong> Storage<\/strong> Disposal<\/strong> HYCON\u00ae Agar Strips are used for monitoring of ambient air and compressed gases with the RCS\u00ae High Flow Touch Microbial Air Sampler and the RCS\u00ae Isolator. They are also applied with the RCS\u00ae Standard and the RCS\u00ae Plus Ex Microbial Air Sampler for monitoring of explosion hazard areas.<\/p>\n Reliable quality:<\/b><\/p>\n Safe and convenient:<\/b><\/p>\n Flexible:<\/b><\/p>\n Additionally, for gamma-irradiated products:<\/b><\/p>\n
\nDG-18 is a selective medium for isolation and detection of xerophilic molds. Accompanying bacterial flora is inhibited by the addition of chloramphenicol and glycerol, which reduces the water activity to 0.95. The inclusion of di-chloran serves to inhibit the rapid spreading of mucoraceous fungi and restricts colony sizes of other genera, easing the colony count. The enzymatic digest of casein is a nitrogen source containing a high level of free amino acids and
\nglucose provides an energy source for the growth.<\/p>\n
\nCasein enzymatic digest: 5 g\/l
\nD(+) Dextrose: 10 g\/l
\nKH2PO4: 1 g\/l
\nMgSO4: 0.5 g\/l
\nDichloran: 0.002 g\/l
\nChloramphenicol: 0.1 g\/l
\nGlycerol: 220g\/l
\nAgar: 15 g\/l
\nSupplements such as buffers<\/p>\n
\nPrior to use the agar strip should be equilibrated to room temperature. Please check each agar strip before use to verify sterility and take care on aseptic handling in order to avoid false positive results. Contaminated or dehydrated agar strips should not be used for sampling.<\/p>\n
\nSeal the wrapper with an adhesive tape or Cover Slides
\nLabel the wrapper e.g. with a waterproof pen for identification.
\nThe closed agar strips are transferred to an incubator.
\nIncubate under aerobic conditions, e.g. acc. to ISO 21527-2 at 24-26 \u00b0C for 5-7 days.<\/p>\n
\nFinally, the number of CFU per slide is examined.
\nGrown colonies may be identified using suitable methods related to root cause analysis programs or to support sanitizing management.<\/p>\n
\n\u2022 Practice aseptic technique when handling agar strips.
\n\u2022 The coated surface of the agar strips should face down during incubation in order to avoid the formation of satellites by condensing water.<\/p>\n
\nThe product can be used until the expiry date if stored in the original box, protected from light and properly sealed at the temperature range indicated on the box label.
\nThe total shelf from the date of production is 6 months.
\nCondensation can be prevented by avoiding quick temperature shifts and mechanical stress. Upon storage agar strips should not be placed near heat sources such as refrigerators with heat-emitting condensers. Boxes should be stored with the coated side of the agar strip facing downwards.<\/p>\n
\nPlease mind the respective regulations for the disposal of used culture medium (e.g. autoclave for 20 min at 121\u00b0C, disinfect, incinerate etc.).<\/p>\n","protected":false},"excerpt":{"rendered":"\n
\n
\n
\n